| Customization: | Available |
|---|---|
| Warranty: | 2 Years |
| Install: | Horizontal |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
JYME1S004-LXLCY-F Series Wired Direct Water Meter is a smart water meter based on MBUS / RS485 standard communication protocol. The distance is far from the network. Easy to write reading and controlling water meters, realizing remote direct reading of water meters, effectively avoiding the management department on top table reading, and improving meter reading efficiency.
The water meter is designed with an electromechanical separation structure, and the measurement is accurate. The base table and the wired acquisition electronic unit can be completely separated, and each independently operate, it is convenient to install, which is convenient for later maintenance. The base table and the wireless acquisition module can be completely separated, and the collecting portion can be connected to Tianshi, Kent, Siemens, Sheshus, Wei Min and miniature sensors, to achieve collection signals, convenient measurement. Each independent operation is convenient to install, which is convenient for later maintenance.
Model:
JYME1S004-LXLCY-F MA111S
Brand:
JinYuMing
JYME1S004-LXLCY-F Series Electrical Parameters
| Name | Parameters | Remark | ||||
| Minimum | Typical | Maximum | Unit | |||
| 1 | Main Power | +2.7 | +3.6 | +3.7 | V | |
| 2 | Battery undervoltage point | 3.1 | 3.4 | V |
||
| 3 | Quiescent operating current |
3 | 6 | uA | Not connected to the reed switch/magnetoresistive sensor, no communication | |
| 4 | Dynamic operating current |
6 | 9 | uA | ||
| 5 | M-BUS remote power supply voltage | 3.6 | V | |||
| 6 | M-BUS remote power supply current | 1 | mA | |||
| 7 | Operating current during communication | 500 | uA | Reed switch/magnetoresistive sensor not working | ||
| 8 | Continuous communication interval | 180 | 480 | mS | ||
| 9 | Continuous Working Time | 6 | year | 4.0Ah battery, remaining power is greater than 70% after six years | ||
| 10 | Communication rate | 2400 | bd | |||
| 11 | Communication distance | 1 | 2 | km | Depends on the number of loads | |
| 12 | MBUS voltage | 24 | 30 | 36 | V | |
| RS485 voltage |
7.5 | 15 | 24 | V | ||
| 13 | Normal Operating Temperature | -10 | 50 | ºC | ||
| 14 | Extreme operating temperature |
-20 | 60 | ºC | ||
| 15 | Storage Temperature | -30 | 70 | ºC | ||
| 16 | Humidity |
85% | ||||
 |
|
| Caliber(mm) | Length L1(mm) | Length L(mm) | Width B(mm) | Height H(mm) | Threaded connection | |
| D | R | |||||
| 15 | 165 | 259 | 98 | 116 | G3/4 | R1/2 |
| 20 | 195 | 299 | 98 | 117 | G1 | R3/4 |
| 25 | 225 | 345 | 104 | 124 | G11/4 | R1 |
| 32 | 230 | 373 | 104 | 124 | G11/2 |
R11/4 |
| 40 | 245 | 446 | 125 | 162 | G2 |
R11/2 |
| 50 | 300 | 446 | 125 | 162 | G21/2 |
R2 |
| 280 |
165(flange outer diameter) | 188 | Flange connection 8-M16 | |||
| Caliber(mm) | Length L(mm) | Height H(mm) | Flange outer diameter ΦD1 (mm) | Bolt hole center circle diameter ΦD2 (mm) | Threaded connection |
| 50 | 200 | 214 | 165 | 125 | 4-M16 |
| 65 | 200 | 224 | 185 | 145 | 4-M16 |
| 80 | 225 | 279 | 200 | 160 | 8-M16 |
| 100 | 250 | 289 | 220 | 180 | 8-M16 |
| 125 | 250 | 299 | 250 | 210 | 8-M16 |
| 150 | 300 | 319 | 285 | 240 | 8-M20 |
| 200 | 350 | 346 | 340 | 295 | 8-M20(1.0MPa) |
| 12-M20(1.6MPa) | |||||
| 250 | 450 | 434 | 395 | 295 | 12-M20(1.0MPa) |
| 405 | 350 | 12-M24(1.6MPa) | |||
| 300 | 500 | 459 | 445 | 400 | 12-M20(1.0MPa) |
| 460 | 410 | 12-M24(1.6MPa) |
){kind=link}